Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2006

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

93 block mount distributor engine into 92 rex-regina 944

posted by  dhalljr on  Tue Mar 8 18:24 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Feb 24 05:30 CST 2007
[RELATED]

Hello all, I am considering swapping in a low mileage block mount distributor engine (presumably out of a 93 240) into my 944. The 944 is a rex-regina car. All I see now are flexplate/flywheel must be changed and new plugs wires. Any other issues that need my attention?

thanks in advance
dhalljr








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    93 block mount distributor engine into 92 rex-regina 944

    posted by  Onkel Udo II on  Wed Mar 9 06:16 CST 2016
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 08:50 CST 2014
    [RELATED]

    Not sure why the flex plate would be changed unless there are a different number of "windows" than on LH 2.4/3.1.

    By "new plug wires) are you implying you plan to use the block distributor instead of the head mounted? Though I am pretty sure this would work, I would suggest considering the complexity of modifying the engine wiring harness verses using the head mounted dizzy.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.