Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2003 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B234 Timing belt tensioner spacer 700 1989

I just replaced an oil pump gasket on my GLE B234 engine. I seem to have lost a spacer for the timing belt tensioner. I have no idea how it came off. Does anyone have the spacer so I can get measurements to make another? Or better yet, a spare I could get? Thanks.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B234 Timing belt tensioner spacer 700 1989

Not sure what you mean by spacer. I just replaced my belt and tensioner and there was just the spring, the pin and the tensioner itself...when apart.

There was no spacer between the back of the tensioner and the block. I do have a 240, but the 700 series B230 should be the same, I would think.
--
"Do you think that's air you're breathing now'? (The Matrix 1999) '94 940T (400K+), 92 245 (250K+K)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.