I need to replace my inner tie rod ends, 1989 240 Wagon.

I know there are different types of rack and pinion units on Volvos, is there just one part number for the inner tie rod ends?

http://www.amazon.com/ACDelco-46A1116A-Advantage-Inner-Steering/dp/B006N9FYUS/ref=sr_1_1?ie=UTF8&qid=1441209838&sr=8-1&keywords=inner+tie+rod+ends+240+volvo+1989

I have to stock two types for my cars, two of which are 89 240's because the CAM/TRW racks are different from the ZF racks. Look at the pictures carefully after looking at what you are replacing.


--
Art Benstein near Baltimore

What engineers say and what they mean by it:
"Requires further analysis and management attention."
Totally out of control.

There can also be a difference within a brand. I've seen a male end on one car and with the same brand rack (don't recall which) on another -- female threads. With the inner tie rod screwed on to the rack it is hard (impossible?) to tell what you've got. 15 years ago I bought a new tie rod (TRW brand part) but it was wrong for my car. Finally a friend had use for it recently. Keep in mind some racks require a special "lock" washer (has tabs in two directions) and they often break on removal. -- Dave