Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2000 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Crossmember bolt size. 200 1990

posted by  chup on  Mon Aug 3 05:23 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 9 14:02 CST 2014
[RELATED]

Last week when I was replacing the rear motor mount I stripped in one of the crossmember bolts.
What's the size of those four bolts? I plan to tap the stripped bolt hole and put in the next larger size bolt and want to get the right size tap w/out buying a whole kit.
Thanks.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Crossmember bolt size. 200 1990

    posted by  Volvo From Heck on  Mon Aug 3 06:59 CST 2015
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Oct 13 20:56 CST 2014
    [RELATED]

    The bolt shank is 10mm. I think the most logical thing to do would be to tap the hole to a non-metric size - the next common metric size would be way large. 7/16" is roughly equivalent to 11mm. -- Dave







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.