Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2021 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

re: 87 245 auto - loose bolt washers on 4th exhaust pipe/header 200 1987

posted by  oldyellr on  Sun Apr 26 10:09 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 14:28 CST 2014
[RELATED]

Sounds about right. The FAQ says: "Retorque to 10-20 ft lbs (14-27 Nm) for B230F/T, 15 ft-lb (20 Nm) for B234F, 7-11 ft lbs (10-15 Nm) for B280F." But it's hard to get in there with a torque wrench. First make sure the threads are clean and the nuts turn easily and use anti-seize on the studs.
--
1992 745, >500k km






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New re: 87 245 auto - loose bolt washers on 4th exhaust pipe/header [200][1987]
posted by  Swedish Baklava  on Sat Apr 25 13:32 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.