Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

brake line cross tee questions 120-130

posted by  hairy apple on  Thu Apr 16 17:58 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 9 14:47 CST 2014
[RELATED]

After I removed my master cylinder with some difficulty, I've decided to change the rusty brake lines. One line leaves the MC and goes to a cross t where two lines go to the front wheels and the last to the back. The cross t holds the brake light switch too.

There seems to be just one big phillips screw holding the cross t to the firewall. Is that correct? Is there a threaded nut fixed inside the fire wall or is the screw of the sheet metal type?

Are the fittings all double flare? Are brake line kits available anywhere?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New brake line cross tee questions [120-130]
posted by  hairy apple  on Thu Apr 16 17:58 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.