Hello,
If it was Gates fuel hose, I am not surprised as I was seeing ruptures in the outer casings in fuel hose I had replaced in less than a year over 5 years ago.
So I switched to Goodyear brand fuel hose and problem solved.
If you are using bulk hose, the fuel hose from the hard line from the fuel tank to the inlet of the fuel pump requires 1/4" hose.
The fuel hose from the outlet of the fuel pump to the carburetors is 3/16". And so is the small piece between the 2 carburetor float bowls covers.
IIRC, originally hose clamps were not used, but I install them on the long pieces of 3/16" hose using "lined" hose clamps that don't damage the outer casing when tightened. So 4 hose clamps are needed if you are using an inline fuel filter like I do.
I don't put hose clamps on the small piece between the 2 float bowl covers because I have NEVER seen that piece fall off when using the proper length of 3/16" fuel hose and because it is sandwiched tightly between the 2 covers.
--
Eric Hi Performance Automotive Service (formerly OVO or Old Volvos Only) Torrance, CA 90502 hiperformanceautoservice.com or oldvolvosonly.com
|