Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2007 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C Belt Install 200 1985

posted by  davegcc on  Sun Mar 29 21:35 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 18 16:27 CST 2014
[RELATED]

Reassembling car after timing belt change. Having difficulty reinstalling the a/c belt. I managed to get it off by loosening a few nuts/bolts on the pump but I cannot find a way to get the pump loose enough to properly install the belt. Also it appears I will need to align the pump to make sure the belts are not torqued.

If anyone can walk me through this I would greatly appreciate it.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

walk it on 200 1989

posted by  anthony2 on  Mon Mar 30 01:45 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jul 22 20:01 CST 2014
[RELATED]

This may not seem like a real "profesional" way to do this,but it works for me. Have someone at the key inside. Remove the coil wire so car wont start. Have person inside tap the key while you 'walk on' the belt. As I said, worked for me.

HOWEVER-----Art has a diagram shows how to loosen a "hidden bolt" to loosen up the A/C.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.