Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2021

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Can the integrated B20 dual manifold be seperated?

posted by  Woodstock on  Sun Oct 19 12:14 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:51 CST 2014
[RELATED]

I was told that you can separate the intake from the exhaust with a reciprocating saw. Has anyone ever done this before?








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Can the integrated B20 dual manifold be seperated?

    posted by  planetman on  Sun Oct 19 12:21 CST 2014
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 09:29 CST 2014
    [RELATED]

    Yes, although we use a cutting torch.

    Are you going to be using the resulting exhaust manifold with the stock D-jet fuel injection?
    --
    Eric
    Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
    Torrance, CA 90502








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Can the integrated B20 dual manifold be seperated?

      posted by  Woodstock on  Sun Oct 19 12:28 CST 2014
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Fri Oct 24 10:51 CST 2014
      [RELATED]

      Thanks Eric. I don't have cutting torches, but do have a sawzall.
      I am not using the D-jet fuel injection, but the head is a fuel injected head that is going to be carbureted.








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Can the integrated B20 dual manifold be seperated? 444-544 1963

        posted by  Whale on  Fri Oct 24 23:20 CST 2014
        Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
        last visit: Fri Jun 14 19:52 CST 2013
        [RELATED]

        Why do you want to separate them? It offers a dual exhaust routing and you can attach it to a B20E head. I had an injected B20 that I converted to carbs in my 544 using that combined manifold.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.