Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Pivot bolt lower control arm 120-130 1967

Replaced lower control arm bushings and although I tried to be careful removing stubborn bolt, threaded end is distorted enough that I'd like to replace with good used one that I can source locally. Phil Stevens if you read this can you respond? I tried your phone number to no avail thinking that you, in Berkeley might have a spare. I've tried Walsh Bros. Ackerman's, etc.
This is the long pivot bolt that goes through the cross member.
thanks








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Pivot bolt lower control arm 120-130 1967

    I should have a good used one.

    New ones are still available for $30.00.
    --
    Eric
    Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
    Torrance, CA 90502








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Pivot bolt lower control arm 120-130 1967

      I was able to straighten it out and clean up the threads enough to get a nut on. I'll go with this for now and keep my eyes open for bolts down the road. Up here in the Bay Area, aside from Mike Dudek, it seems thata lot of the old shops that used to work on 122 and PVs have deaccessioned their parts stashes, maybe to you.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.