Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2010 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

idle control wire's bad connection 700

I have a problem with the wire's for the idle control I have to keep unplugging and replying the wires in to keep idle right. How do I best fix it?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

idle control wire's bad connection 700

See if the female side of the connector are backing out when you plug it in. You can also use a jewelers screwdriver to bend the female side tighter. From the backside of the connector you'll see where the bent part holds the connector inplace.
--
Post Back. That's whats makes this forum work.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

idle control wire's bad connection 700

Thanks. I will check that tomorrow.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.