Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

How to Replace Wheel Stud on 240 with ABS? 200

posted by  Dan Marino on  Mon May 19 10:53 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:46 CST 2014
[RELATED]

Was wondering how to replace a wheel stud on a 240 with ABS? ABS 240's have an extra gizmo on the back side of the wheel hub that gets in the way of inserting new studs. I ended up forcing it through with a hammer and goofed up a few of the threads, but it worked ok after I cleaned up the threads some.

Thanks,
13








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    How to Replace Wheel Stud on 240 with ABS? 200

    posted by  Adirondack Blues on  Fri Jun 6 20:33 CST 2014
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Sep 8 12:11 CST 2014
    [RELATED]

    Most Volvo techs grind one side of the stud down a bit.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      How to Replace Wheel Stud on 240 with ABS? 200

      posted by  sparro on  Mon Apr 22 20:18 CST 2024
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Mon Oct 13 15:59 CST 2014
      [RELATED]

      Does this method applies same to 240 witout ABS? How long will it take to replace all studs? I am not mechanically inclined and plan to have the general mechanic to do it. Any other special tricks that one has to be aware of? How complicated is this task? Thank you.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    How to Replace Wheel Stud on 240 with ABS? 200

    posted by  scorron on  Mon May 19 14:42 CST 2014
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Tue Oct 7 21:10 CST 2014
    [RELATED]

    Grind the head of the stud down a bit on one corner and it should slide in. That's the easiest way I've found.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      How to Replace Wheel Stud on 240 with ABS? 200

      posted by  Dan Marino on  Tue May 20 07:27 CST 2014
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Fri Oct 24 10:46 CST 2014
      [RELATED]

      Great idea. I wish I had thought of that!!!!
      Sometimes an easy solution is right there in front of me and I don't even see it!!!!
      Well, next time I know what to do. Haha.








      •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

        How to Replace Wheel Stud on 240 with ABS? 200

        posted by  stogeyman on  Thu Jun 5 19:03 CST 2014
        Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
        last visit: Fri Jun 13 18:07 CST 2014
        [RELATED]

        I have a 245 with ABS and they come out without grinding. There's a hole behind the hub (that holds the studs). Line up a stud with the hold and hammer it with a heavy hammer. There's just enough room for the stud to come out. I replaced all mine that way.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.