Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2010 444-544 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Dash top 444-544 1969

Hi, I am replacing the dash top on my PV. I need the fillets which cover the ends where they but up to the A pillar.Picture here. http://www.volvoforums.org.uk/showthread.php?p=1633143#post1633143 I have the right hand one but need the left. can any body help?








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Dash top 444-544 1969

    To Planet man.
    Hi, We communicated about 10 days ago on the "brick
    board" regarding the end pieces on dash top and you intimated that you had
    either a used one or a pair of new. I would be happy to purchase the pair
    if you have them or the single. I could pay either by Pay pal or bank transfer.
    Regards, George. Portugal.
    Not had much success in making one that looks right.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Dash top 444-544 1969

    I should have a used one. I know I have a pair of NOS, but I won't separate them.
    --
    Eric

    Hi Performance Automotive Service (formerly OVO or Old Volvos Only)

    Torrance, CA 90502








    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      Dash top 444-544 1969

      If you have a used left hand one that's what i need but a pair would be fine, BTW what's NOS?








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Dash top 444-544 1969

        NOS=New Old Stock, meaning old brand new parts that are still in box and have been sitting on a shelf for years. Often such parts are NLA (No Longer Available)

        And expensive :)

        --
        -Matt I ♥ my ♂








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          Dash top 444-544 1969

          I made my own, but you have a BIG advantage, you have one of them. use very thin sheet metal or sheet aluminum and simply make a mirror image (opposite) of the one that you have. paint it as needed and you're good to go for almost nothing other than a little time and a piece of metal smaller than your hand. Mine worked out very well and I'm sure yours will too. Good luck with it and have fun.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.