Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2009

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Door exterior moulding removal

1992 940 sedan
Hi all, been a long time. Still love the volvos.
Can someone enlighten me on how to remove the exterior horizontal mouldings from the door and front fender? I mean the ones that are about 10 inches from the bottom. Faq just says to pry off, i just want to be sure. Thanks

Greg
Montreal canada.
--
Greg Mustang - www.volvoclassic.bravehost.com








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Door exterior moulding removal

    bump up...
    anyone knows?
    --
    Greg Mustang - www.volvoclassic.bravehost.com








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Door exterior moulding removal

      I've never done this, and my 945 came to me with two of those trim pieces held on with little screws, so i suspect it is not easy to do without damaging plastic clips. Here's the one relevant section in the greenbook. Written for the late 960 trim, but notice the text says the process is the same as for the earlier style.



      good luck,
      John
      --
      1989 245 245K / 1993 945 131K







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.