Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel filter and pump 200

So I went to change my fuel filter last night so I pulled the main pump fuse and let the car run but it went for a good 10 minutes and didnt stall. How long is it supposed to take!?

Also I noticed the pump is pretty rusty all over, so is the fitting on the front side that connects to the filter. I bought a new connecting line from IPD but I'm thinking I might just buy a new pump while I'm at it to save any headaches now and in for the future.

What do you guys think? What have been your experiences? Would it be wise to go ahead and change the line from the filter to the rail? That banjo bolt looks a little tired too.

http://www.ebay.com/itm/FUEL-PUMP-VO...2fa040&vxp=mtr

This one seems to be the cheapest around.

Then there's these new banjo bolts...

http://www.ebay.com/itm/NLA-Volvo-24...35900b&vxp=mtr

What else do you guys recommend?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel filter and pump 200

I'm also fallowing your write up here Art.

http://cleanflametrap.com/fline.html#fitting







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.