Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2021 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

got the relay from Eric, the 76 is thus far running great, the 89 however has both motor mounts broken 200

I have both mounts off but is there a logical simple way to re-install when you only have a floor jack?

Kris








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    got the relay from Eric, the 76 is thus far running great, the 89 however has both motor mounts broken 200

    Floor jack and short length of 2x4 positioned at edge of oil pan. Note this is NOT on the oil pan. I have not damaged one yet.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    got the relay from Eric, the 76 is thus far running great, the 89 however has both motor mounts broken 200

    Jack the engine up by the front crank pulley, do NOT jack the engine up by the oil pan, you will crush it!








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      got the relay from Eric, the 76 is thus far running great, the 89 however has both motor mounts broken 200

      Thanks Swedish and Jorrell.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.