Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2004 444-544 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

H4 set up 444-544 1967

posted by  arcturus on  Wed Jan 29 08:43 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jul 8 01:55 CST 2014
[RELATED]

Hi, my carbs are running very rich so I have decided to replace the float forks and needle valves. Will I need to reset the float level or will the new forks and needles have the correct profile of the shelf? Thanks.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

H4 set up 444-544 1967

posted by  Dakar09 on  Wed Jan 29 09:08 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 22:23 CST 2014
[RELATED]

I'm not an SU expert by any means, but if you're replacing the float forks and needle valves, I would essentially treat this as a "rebuild" and follow the steps for putting it back together and the required calibration/initial setup.

There's a ton of documentation for this online to act as your guide.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

H4 set up 444-544 1967

uid 4846's pic
posted by  JohnMc on  Wed Jan 29 09:11 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 07:42 CST 2014
[RELATED]

AFAIK you'll almost certainly need to reset the float levels.
--
'63 PV544 rat rod, '93 Classic #1141 245 (now w/16V turbo)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.