Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2021 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

headlights tail lights 200 1980

1980 249 dl. headlights and tail lights do not work. If I pull on high beam stalk high beams come on. hazards work. fuses good. seems like main switch to me, any thoughts?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

headlights tail lights 200 1981

It is common for the switch to fail because there is no relay for the low beams. Check the connector on the switch for overheating also. If you have a multimeter check the operation of the switch.
Find the factory wiring diagrams at k-jet.org or http://www.box.com/volvowiring#.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

headlights tail lights 200 1981

Did an inspection of switch and it was indeed an overheated terminal. had to splice in a new lead and terminal connector and all good.
Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

headlights tail lights 200 1981

The internal switch contacts do burn up in time. Consider installing a generic 12V relay to unload the high current duty from the switch. Mount on left fender next to high beam relay.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.