Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 9/2009 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Can you identify this part? 200

posted by  someone claiming to be GoVo on  Thu Nov 28 11:41 CST 2013 [RELATED]

Hello Brickers,

I'm looking to identify a part for my 1990 Volvo 240.

It is the part you need to disconnect when you take off the throttle body. It has a black clip on each end that attaches to a small, metal ball. You unclip one side of the part when removing the throttle body.

Can anyone tell me what the official name is and possibly where I can get a new one?

Thanks in advance...

GoVo








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Can you identify this part? 200

    posted by  Paulii on  Fri Nov 29 08:55 CST 2013
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Jun 6 03:04 CST 2014
    [RELATED]

    How many do you need, send me an email and I will send you one. Pauli








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Can you identify this part? 200

      posted by  someone claiming to be GoVo on  Fri Nov 29 16:46 CST 2013 [RELATED]

      Hi Paulii,

      What's your email address? I only need 1.

      I would happily pay you for one!

      Thanks

      GV








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Can you identify this part? 200

        posted by  someone claiming to be bob on  Fri Nov 29 20:42 CST 2013 [RELATED]

        Please note, the threads on the plastic socket for the throttle linkage are odd. 1 end is right hand thread, the other is a left hand thread.








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          Can you identify this part? 200

          posted by  someone claiming to be GoVo on  Sat Nov 30 10:09 CST 2013 [RELATED]

          thanks for the tip!








          •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

            Why the rod end threads differ... 200

            uid 18083's pic
            posted by  lucid on  Sat Nov 30 10:48 CST 2013
            Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
            last visit: Fri Oct 24 12:31 CST 2014
            [RELATED]

            ...is so the length of the "Throttle Control Rod" can be adjusted, if necessary.

            When the 2 lock nuts are loosened (rod still attached at each end), the rod length can be made longer or shorter, depending on which way the rod is turned.

            See Bentley 240 manual, Air Intake section (250).

            --
            Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Can you identify this part? 200

    posted by  aleekat on  Thu Nov 28 12:33 CST 2013
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 13:19 CST 2014
    [RELATED]

    I would call it throttle linkage but guessing dealer is about the only place unless salvage yard.
    --
    Post Back. That's whats makes this forum work.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.