Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2020 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

ISO Metric Bubble kit recommendantions? 200 1991

I have successfully rounded off a couple of the brass fittings used in the braking system of my 91 240. I will now need to purchase a flaring tool kit. Any opinions on a good kit?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

ISO Metric Bubble kit recommendantions? 200 1991

I rented one from Autozone last month do make a rear hardline on my '69 Mustang. It worked great. I practiced on a scrap piece of brake tubing first. Good luck.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ISO Metric Bubble kit recommendantions? 200 1991

This one for $29.99 looks like mine. Haven't used it in years but it did the job.


--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

ISO Metric Bubble kit recommendantions? 200 1991

if your budget can afford it this is the one too buy.

head and shoulders above everything else.

http://www.ebay.com/itm/Mastercool-71475-Universal-Hydraulic-Flaring-Tool-Set-/360316094548?pt=LH_DefaultDomain_0&hash=item53e4834854&vxp=mtr

you can likely sell it fast on CL for close to what you pay for it as well







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.