Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

CAM rack steering shudder 200 1990

posted by  matt82dl on  Sun Jun 30 21:15 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 10:46 CST 2014
[RELATED]

Hello I just finished installing a re-manufactured cam rack on my 240. I flushed the system well before removing the old rack, followed the FAQ bleeding procedure after installation: turn lock to lock with engine off, then with engine cranking etc, etc...

I'm still getting shuddering when turning at low speed so I think I still have air trapped. Any other suggestions? Ball joints and tie rod ends are less than 1 year old.

thanks,

--
'90 245 290k, '93 945 296k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New CAM rack steering shudder [200][1990]
posted by  matt82dl  on Sun Jun 30 21:15 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.