Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'Sticky' ignition key 200 1991

posted by  rodvt on  Sun Mar 3 10:35 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 28 11:21 CST 2014
[RELATED]

Hi All,
Over the last couple of days I have had an intermittent starting issue.

When I turn the key to start the car it is as if the key doesn't return when I release it and the starter remains engaged. It has only happened three times over probably a dozen starts.

So is it: Me? the ignition lock/switch? Or the starter?

I quickly turn the car off and restart and everything is normal

Thanks,

Rod

1991 245 285k
2002 S60awd 220k
2000 V40 236k








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    'Sticky' ignition key 200 1991

    posted by  Dakar09 on  Sun Mar 3 12:26 CST 2013
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Thu Oct 23 22:23 CST 2014
    [RELATED]

    If you feel the "stick" in the key and it doesn't return, then it's the switch, not the starter. There is a return spring in there that may have failed or the switch tumbler itself is worn out or catching. I had the same issue on my PV and a new switch solved it.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    'Sticky' ignition key 200 1991

    posted by  machine man on  Sun Mar 3 11:59 CST 2013
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed Oct 22 15:40 CST 2014
    [RELATED]

    Have you tried a graphite product? There is a powder and spray. Since this has an electrical component on the back end the powder might be best first.

    If that does not work use a spray silicone that has a fast evaporating solvent and then go back with the graphite powder. The spray might remove gunk and spread the previous powder around, so its ends up a double whammy.

    You can use it on all your locks on the car and about the home.

    Phil







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.