Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2017 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Cam plug at rear of head question 200 1991

posted by  Kyle245 on  Fri Jan 11 10:14 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 10 04:45 CST 2014
[RELATED]

I found my answer.

Thanks








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Cam plug at rear of head question 200 1991

    uid 18083's pic
    posted by  lucid on  Fri Jan 11 12:07 CST 2013
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 12:31 CST 2014
    [RELATED]

    Not sure what he question was, Kyle. But there may be more than one answer.
    Mine would be to leave the rear Cam Plug alone if it isn't leaking.
    However I would make and install a retainer strap as Don Foster posted here several years ago. Any kind of light metal would do the job.
    The 2 tapped holes are already there.





    --
    Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Cam plug at rear of head question 200 1991

      posted by  joekidd on  Fri Jan 11 16:30 CST 2013
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Fri Oct 24 10:54 CST 2014
      [RELATED]

      IPD used to sell the cam seal retainer plate. worth every dollar.








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Cam plug at rear of head question 200 1991

        posted by  raidman on  Fri Jan 11 16:47 CST 2013
        Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
        last visit: Fri Apr 4 22:17 CST 2014
        [RELATED]

        Bought one for son's 93 245. Had one blow out on a previous 240 and the mess was tough to clean up. I prefer to make one as per instructions now.
        el raidman








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          Slot an end 200 1991

          posted by  Trev29 on  Sat Jan 12 06:09 CST 2013
          Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
          last visit: Fri Oct 17 05:56 CST 2014
          [RELATED]

          You can slot one end rather than try to get the spacing for the holes exact.
          --
          1980 245 Canadian B21A with SU carb, M46 trans, 3:31 dif, in Brampton, Ont.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.