|
For innumerable reasons, no, please don't do that.
I asked some time ago whether the B230 harmonic balancer crankshaft pulley bushing could be replaced be pressing out the old and pressing in a new bushing. No such kit exists. The thread response when into the crankshaft construction between the drop forged crank of say, like the B23,21, and so forth versus the low friction B230 equipped cast iron crank shaft and why a B230 requires a sound and fit harmonic balancer crankshaft pulley.
Search your local salvage yards for a better example from a newer B230 in a 240 or some 700/900. Verify the replacement is the same offset back to front with your failed B230 harmonic balancer crankshaft pulley. Some B230 harmonic balancer crankshaft pulley off models different than the 240 may sit reward.
You may get lucky and find a B230 with a replaced harmonic balancer crank pulley. I have.
Else, buy new from Tasca or the knock variant from, oh, I forget. The one you find at FCP Groton and iPD.
You can't fit a solid metal crank from a B19/21/23 onto a B230.
Doing it cheap does not work.
Hopefully you can find a used B230 harmonic balancer crankshaft pulley in better condition than yours.
cheers,
Buttermilk Bottle is Empty.
|
