Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Volvo tools 200 1993

posted by  mort on  Thu May 3 16:46 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 26 19:33 CST 2012
[RELATED]

Would like to know what are the metric tool sizes, both socket and wrench, I would need to keep on hand for maintenance of my 240 wagon, 1993
Thanks
Mort








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Volvo tools 200 1993

posted by  Pilicer on  Mon May 7 23:17 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 26 22:52 CST 2013
[RELATED]

An 8mm "gearwrench" (ratcheting wrench) is nice to remove the crank positioning sensor.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Volvo tools 200 1993

posted by  pageda on  Thu May 3 19:02 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

10 mm to 24 mm seems to cover most of it.
Dan








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Volvo tools 200 1993

posted by  Jorrell on  Thu May 3 20:07 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Dec 27 03:00 CST 2012
[RELATED]

And don't forget a set of Torx drivers if you are going to do any work in the interior. (I know, outside the scope of regular service and maintenance)

jorrell
--
92 245 317K miles, IPD'd to the hilt, 06 XC70, 00 Eclipse custom Turbo setup...currently being enjoyed!








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Volvo tools 200 1993

posted by  Bradley on  Thu May 3 20:14 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:56 CST 2014
[RELATED]

....and a pair of needle-nosed pliers, along with a cheapie Harbor Freight voltmeter or a 12V test light.

B







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.