Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2008 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil pressure sender 200

Hi, I'm transferring the oil pressure/volt meter/OAT gauge cluster from an 83 GLT to a newer wagon. Need some help as to where the sensor for the oil pressure is located. Thx








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil pressure sender 200

You'll probably need two different size (long) sockets. The later sender (for a B230) is 24mm, but I think the size for the B23 is smaller. Check the threads on the two senders, too, just in case.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil pressure sender 200

thanks!








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Between the oil filter and alternator NMI 200







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.