Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<] [>>]

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

REPLY TO THIS MESSAGE

Replies to this message will be emailed.

SAVE

Oil pressure sender 200

posted by dmcleod on Sun Apr 22 00:24 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Fri Jun 1 23:54 CST 2012

[RELATED]

Hi, I'm transferring the oil pressure/volt meter/OAT gauge cluster from an 83 GLT to a newer wagon. Need some help as to where the sensor for the oil pressure is located. Thx

REPLY TO THIS MESSAGE

SAVE

Oil pressure sender 200

posted by Ken C on Sun Apr 22 08:50 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Fri Oct 24 11:39 CST 2014

[RELATED]

You'll probably need two different size (long) sockets. The later sender (for a B230) is 24mm, but I think the size for the B23 is smaller. Check the threads on the two senders, too, just in case.

REPLY TO THIS MESSAGE

SAVE

Oil pressure sender 200

posted by dmcleod on Sun Apr 22 11:52 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Fri Jun 1 23:54 CST 2012

[RELATED]

thanks!

REPLY TO THIS MESSAGE

SAVE

Between the oil filter and alternator NMI 200

posted by Trev29 on Sun Apr 22 05:19 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Fri Oct 17 05:56 CST 2014

[RELATED]

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.