Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2013 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

240 egr pipe removal -exhaust manifold gasket replacement 200 1989

have the manifold nuts/bolts removed and now am needing to remove the egr pipe.
have pb'd it for while and now which of the nuts do i turn? the outer most or the one next to manifold.

looked at faq's and they say remove egr pipe. any other tips on doing this gasket job easy/easier?

thanx
gary c.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    240 egr pipe removal -exhaust manifold gasket replacement 200 1989

    counter hold the one next to the manifold and turn the outermost nut








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      240 egr pipe removal -exhaust manifold gasket replacement 200 1989

      tough to get one wrench in there let alone 2. :)but, i'll give it a shot

      tanx
      gc








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        240 egr pipe removal -exhaust manifold gasket replacement 200 1989

        the nut is off , but the pipe itself is stuck/rusted in the fitting and won't budge. any suggestions ?

        if all else fails, i may find myself with non egr car if i need to cut the egr pipe to get manifold off to replace gasket.
        no smog tests here in anchorage anymore anyway.

        gc







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.