Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2024 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Starter bolt size 200 1990

posted by  BrickDad on  Sat Feb 4 08:58 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:17 CST 2014
[RELATED]

Does anyone know the size of the starter bolts for a 91 240 with M47? I had to cut mine off and lost the pieces now that I am reassembling. As I recall the upper and lower were different lengths and had 18 mm heads and screwed into the starter housing without nuts.

Brian Mee
90 240DL
91 240
92 940T







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Starter bolt size 200 1990

    posted by  240GT on  Sun Feb 5 10:27 CST 2012
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Sun Feb 23 16:37 CST 2014
    [RELATED]

    I'm fairly sure that they are 19mm heads. Unless they changed them from 86 to 90? That's all I got though. Not sure of the length nor thread count.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.