Volvo RWD S90-V90 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2001 S90-V90 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

how to replace drivers side motor mount 1997 s90 S90-V90

posted by  someone claiming to be alleyoop on  Mon Nov 28 21:28 CST 2011 [RELATED]

I have removed the old broken mount on the drivers side but I cannot obtain enough clearance to install the new one. Engine is jacked as far is can be. Looks like I might have to remove the A/C compressor to get enough clearance but I do not want to remove the compressor lines from the compressor. Any tricks involved.









  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

how to replace drivers side motor mount 1997 s90 S90-V90

uid 11021's pic
posted by  dewfpo on  Tue Nov 29 00:49 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:34 CST 2014
[RELATED]

You need to jack the motor up from the drivers side of the engine not the center of the motor. You want to rotate the motor up on the drivers side, not tilt it back towards the rear.

I've done a 95 964 and a 98 S90 the same way.

DEWFPO
--
1998 S90 083,228 and 1995 964 154,100







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.