Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2000 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fuel line both steel and rubber where buy? 700 1991

I have a 740 and 940, both 1991, B230FT and wagons.
Both have identical fuel lines.
I can not find a soft (annealed so I can flare it) steel (preferably stainless)
tubing that is 1/2" OD. Also rubber fuel line that is 1/2" ID.
I don't know about other Bricks but both mine use 1/2" rubber from the tank joining to a pre-bent rigid steel line then back to rubber to mate with inlet of the foreward fuel pump. Hosemaster makes some very nice flex stainless steel hoses w/ pipe fittings on each end.

The salt here is just killing my lines. I've been using copper tubing and heater hose but am less than thrilled with those.

I'm in Ontario, Canada but will go where I need to make this work.

Any other options people have used?

ian








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Fuel line both steel and rubber where buy? 700 1991

    Napa (Canada had 1/2"ID rubber fuel line.
    Couldn't find steel line so I'm using copper, more expensive, easy to get & much less reactive than steel.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.