Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2009 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

242 1980 GT driving Lights 200 1980

Driving Light bulbs need to be changed what kind is the best and do I replace them from the rear of reflector..Thanks in advance








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

242 1980 GT driving Lights 200 1980

How about some help here Guys...








  REPLY TO THIS MESSAGE    PRINT   SAVE 

242 1980 GT driving Lights 200 1980

If they are the stock fogs, they come out from the front, one screw on either side.

Bulb is H3.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

242 1980 GT driving Lights 200 1980

Turns out there is a plastic piece and a screw at the bottom of the lens.. Pops right out thurned oout to be a good bulb and bad gound.. Thanks for the info..








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

242 1980 GT driving Lights 200 1980

They are stock...The screws are on the side of the housing ???







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.