Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2022 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

intake manifold gasket 700 1990

seems i have to change it out dont know what brand ws on there, any tricks - im getting a replacement from a local volvo shop

thanks








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    intake manifold gasket 700 1990

    On my 200 I found that those ratching box wrenches (Gear Wrench) were a blessing for two of the Manifold Nuts. Couldn't get at them with a socket.

    the 200 may be different then the 700 but I left everything on the manifold (I took off the Intake Bellows) and just flipped it up off the head.
    Guarenteed to drop a few nuts.. get one of those magnetic pointer tools.
    Like this http://www.alibaba.com/product-gs/247973597/Car_Tool_Telescopic_Magnetic_Tool.html
    --
    '75 Jeep CJ5 345Hp ChevyPwrd, two motorcycles, '85 Pickup: The '89 Volvo is the newest vehicle I own. it wasn't Volvos safety , it was Longevity that sold me http://home.lyse.net/brox/TonyPage4.html http://cleanflametrap.com/tony/








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    intake manifold gasket 700 1990

    Disconnect the throttle cable, take out the support strut bolt, and pull the manifold away from the head. These may not be entirely necessary but I thought they made things easier, and less likely to damage the cable.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.