Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2016 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

driver door won't lock 200 1989

Got the power locks working -- except that the driver's door lock button won't go down unless I push the latch mechanism, on the edge of the door, into such a position that the door won't even shut. Same thing when I try to lock it with the key.

This sound familiar to anybody? I can't make any sense of the diagrams in the book, or the way all those parts move around when I play with them.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

driver door won't lock 200 1989

With the driver door open you can only lock the other 3 doors with the knob.Drivers stays open.You can olny lock the drivers drom the outside with the key,or if you open a rear door close the driver door and reach in from the back and push the driver knob down.Now all the doors lock.Just keep the keys in your HAND!








  REPLY TO THIS MESSAGE    PRINT   SAVE 

driver door won't lock 200 1989

Does it lock if you close the door and push the button down through the open window or through the open the back door? Or if you use the key? If that is the case then it may be a security feature that I noticed with an '89 - so you can't accidentally lock yourself out.

My '80 allows you to push the knob down and close the door, thus locking yourself out, even unintentionally.

There may be a part in the locking mechanism that can be removed to allow knob push-down while the door is open.
--
1980 245 Canadian B21A with SU carb but electronic ignition and M46 trans in Brampton, Ont.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

driver door won't lock 200 1989

Well, holy crapolie! I shoulda thought of that! Problem solved. I'm so used to my '83 that I've had for 15 years, and the PO did all kinds of strange things to this car; I just assumed that was one of them...

thanks!








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

driver door won't lock 200 1989

"Same thing when I try to lock it with the key."

Be aware of the plastic doughnut that surrounds the lock cylinder. If it has come loose the metal tab will not connect to the white plastic prong. When this happens, you can't engage the CL with the key. My car suffered from this twice until I made a permanent fix involving zip ties.



Good luck,
Erling.
--
My 240 Page








  REPLY TO THIS MESSAGE    PRINT   SAVE 

driver door won't lock 200 1989

The interior trim panel can be removed. Then you will be able to see how the linkages work. Also check the wires' condition where they go into the door from the"A" pillar, they can get frayed and weak.

Good Luck,

Bob

:>)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.