Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

who is karlyn? parts source - brand 200

Hi:
I need to get some 245 parts real soon and am thinking FEBI/BILSTEIN, MOOG, and staying away from Scantech and URO. However, swaybar links are available on Pelican Parts made by Karlyn. Any experience? Thanks.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

who is karlyn? parts source - brand 200

I bought some aftermarket swaybar endlinks from FCP and they were made by MTC. They looked more beefy than the stock ones. Deceided to get another set as spares thinking they'd be the same. This time they shipped some made by Karlyn. Not as nice as the MTC ones, they were made in Tawian. Might be ok. I'd go for TRW parts over MOOG. Are you getting Bilstein HD's?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

who is karlyn? parts source - brand 200

i know karlyn because i like their plug wires for mercedes and bmws. did not know they did hard parts. MIGHT be worth a try. myself, bilstein or oe, nothing else. good luck, chuck.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.