Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2006 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

960 sedan steering wheel column cover removal 900 1994

posted by  ergoadams on  Fri Feb 25 07:31 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Feb 28 15:25 CST 2011
[RELATED]

I have searched the forum for an answer to this question. I am trying to replace turn signal switch. I removed two "shallow" torx screws from the bottom cover. I turned 4 additional "recessed" torx screws. They did not come out, but I assume they are not supposed to come out. Now I am trying to release the bottom from the the top half of the cover. Is there any trick to releasing the two pieces?

Thanks in advance!







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    960 sedan steering wheel column cover removal 900 1994

    posted by  DanR on  Sat Feb 26 13:36 CST 2011
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Thu Oct 23 15:25 CST 2014
    [RELATED]

    Those four screws do need to be removed, sometimes the tool you are using is tight in the hole of the housing and gives the sensation that your are loosening the screws. I wish I could remember what the size was, because you may be using the wrong size.
    The can be somewhat of bear to install too.

    DanR '94 964 356,000 miles (122,000 on the new engine)
    --
    DanR







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.