Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2002 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Fitting Size on Clutch Master Cyl 120-130

Does anyone know what the npt is on the clutch master cyl on the 122s. Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Fitting Size on Clutch Master Cyl 120-130

NPT? Don't they use flared fittings like the brake system? Most of those are 3/8"-24.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Fitting Size on Clutch Master Cyl 120-130

Hello,

Tim, you are correct, 3/8"-24.

Both the clutch and brake master use a copper sealing washer for their fittings.

FYI, the clutch and brake master fittings are different as the clutch uses 1/4" tubing and fittings, while the brake system uses 3/16" tubing and fittings.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fitting Size on Clutch Master Cyl 120-130

Eric!
¿Why do you suppose they did that? Bargain price on overstock parts?
More flow needed?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Fitting Size on Clutch Master Cyl 120-130

Suspect it's because the clutch cyls throw is many times that of brake cyls.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.