Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2005 1800 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

retractable seat belts 1800 1967

Hi all , i have a 1967 1800s and would like to fit some retractable/ inertia reel seat belts. Anyone had success with this and details if you have please. Regards David








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    retractable seat belts 1800 1970

    I bought pair of retractors from a guy on eBay that mount to the rear most hard points (behind the rear widows). They already had ends compatible with my latch. They didn't solve the problem of having to hang the belts up each time, but they do make things a bit less messy.

    You could probably adapt a set of retractors from a 140 or 240, but safety would require some welding of hard points into the roof pillar and into the frame at the floor.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    retractable seat belts 1800 1967


    I used the Securon multiple position inertia reel conversion. Look on Ebay and you'll see them listed for MGBs

    http://cgi.ebay.co.uk/SECURON-INERTIA-SEAT-BELT-MG-GT-ROADSTER-MIDGET-/380241481120?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5888288da0







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.