Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2008 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

looking for a ratchet socket size 700 1990

What size socket fits the hub nut on the 780 with ABS brakes. (has the reluctor wheel) The flange nut is in a recessed opening.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

looking for a ratchet socket size 700 1990

Thanks to all for replying. We figured it out. It takes a 36mm socket, the same as many other similar hubs on other European cars of that era. We pulled the hub and hope the replacement arrives tomorrow.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

looking for a ratchet socket size 700 1990

If it's like the '93 940 with ABS and Girling single-piston "Jumbos", the flanged hub nut has a 36mm hex.
--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

looking for a ratchet socket size 700 1990

Earlier and later ones use 3/4" or 19mm, only a couple thou different.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.