Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2016

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

source for more affordable B18 pistons?

Just wondering if anyone knows of a source that carries (or if anyone happens to have) .40 over sized pistons for the B18. The sets for $450 are kind of harsh.
Thanks!
--
Jake








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

source for more affordable B18 pistons?

I hope you mean 0.040".
0.40" oversize is bigger than B20!
Pistons ARE pretty expensive.
Sometimes they show up on ebay. Right now there is a lots of 3 0.030" oversize B18 pistons,
Ebay item number 310249759991








  REPLY TO THIS MESSAGE    PRINT   SAVE 

source for more affordable B18 pistons?

Yes! I apologize, haha.
The cylinders in the block I have are a bit scratched. The shop thinks that it might need to get bored to .040 but.. maybe .030 will do.
--
Jake








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

source for more affordable B18 pistons?

Scratched? It takes a whopping scratch to be more than 2 or 3 thou deep!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.