Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2015 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

exhaust header to down pipe stud thread pitch 900

posted by  Jay02050 on  Sat Sep 25 02:54 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 28 18:04 CST 2011
[RELATED]

Will be replacing the gasket on a 95 940 today. Do the studs have the same pitch on both ends? Thanks jfor any help







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    exhaust header to down pipe stud thread pitch 900

    posted by  Jay02050 on  Mon Sep 27 09:10 CST 2010
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed Sep 28 18:04 CST 2011
    [RELATED]

    Dumb! Remove one and took another car matched at the auto store.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      exhaust header to down pipe stud thread pitch 900

      posted by  dinomartino on  Mon Sep 27 09:46 CST 2010
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Fri Oct 24 04:43 CST 2014
      [RELATED]

      Do be careful when installing the new studs into the manifold, you do not want to strip the threads in the manifold. Been there, done that, and can tell you that a through-bolt is a less-than-perfect fix.

      John







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.