Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2016 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing the heater control label 120-130 1966

posted by  Dylan Berichon on  Thu Jun 17 21:59 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:22 CST 2014
[RELATED]

Greetings all,

I was wondering what's involved in replacing the piece of plastic that goes around the 3 knobs on the heater controls.

The one on my car is cracked and part of it has broken off.

Any tips?

Thanks!
--
http://dylans122.blogspot.com








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing the heater control label 120-130 1966

posted by  greezy on  Mon Jun 21 13:49 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 4 21:21 CST 2011
[RELATED]

Are those for sale somewhere? Mine is gone.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing the heater control label 120-130 1966

posted by  malloy1 on  Fri Jun 25 11:36 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 12 17:44 CST 2014
[RELATED]

ebay for a $1:

http://cgi.ebay.com/ebaymotors/VOLVO-AMAZON-122-121-HEATER-CONTROL-PLATE-NEW-_W0QQcmdZViewItemQQhashZitem35aa475033QQitemZ230490066995QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing the heater control label 120-130 1966

posted by  greezy on  Fri Jun 25 12:04 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 4 21:21 CST 2011
[RELATED]

Hey thanks! I put in a bid.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing the heater control label 120-130 1966

posted by  agent_strangelove on  Fri Jun 18 05:13 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jul 5 06:07 CST 2014
[RELATED]

The way I have done it is to pull the whole unit out of the dash (don't have to disconnect the cables from the heater valve, flaps in the box) by the couple of screws hold it in the dash. The knobs don't come off the levers so you have to spread the 'strips' of the over lay. They will not spread side to side but you can flex them front to back. Thus you flex the middle area back and the side forward. It helps if the knobs are not all lined up. You can then slip the overlayment over the knobs. This will make sense when you start to play with it...


Chris







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.