Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2010 120-130 INDEX

[<<] [>>]

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

REPLY TO THIS MESSAGE

SAVE

Need front end alignment shop referral in Connecticut 120-130

posted by Danny on Mon May 31 16:14 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Mon Oct 6 22:01 CST 2014

[RELATED]

Friday I pulled the crossmember off a car in Pennsylvania and we then drove 115 miles to where J's car is parked in CT, and Saturday swapped that one for the one in his car. Went pretty well. Everything appears to be pretty tight. We're going to replace the upper control arm bushings and then it's time to get it aligned. Can anyone recommend a shop in Southeastern CT familiar with working an older type suspensions?
thanks

REPLY TO THIS MESSAGE

SAVE

Not a shop, but some information: 120-130

posted by malloy1 on Tue Jun 1 02:11 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Sun Oct 12 17:44 CST 2014

[RELATED]

http://vclassics.com/archive/align.htm

Has some good information about alignment settings.

Paul

REPLY TO THIS MESSAGE

SAVE

Not a shop, but some information: 120-130

posted by malloy1 on Tue Jun 1 09:35 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Sun Oct 12 17:44 CST 2014

[RELATED]

BTW-

Somebody stated that adding an 1/8" shim to each dog bone bolt (so 4 shims total) will change the camber by -1/2*

Paul

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.