Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2020 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

AC 134 700 1991

Tried to add 134, but the system seems to be at about 60 psi, so none will go in.
Has anyone written instructions(step by step) on how to drain the system, pull a vacuum(if I can rig up the proper plumbing), and refill the system?
Can I use a hand vacuum pump?








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    AC 134 700 1991

    You give no history or details.
    Was sytem converted to R134?
    Was system opened or completely empty? If yes you must install a new receiver dryer and vacume down with a vacume pump (not a hand vacume puller).
    60psi? with compressor running?
    Compressor must be running to fill system.
    --
    David Hunter








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    AC 134 700 1991

    this might help.

    http://www.brickboard.com/FAQ/700-900/VolvoR134Conversion/R134ConversionPage1.htm
    --
    Post Back. That's whats makes this forum work.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.