Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2012

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

3rd row seats-- seatbelts HELP! Mid-Project Saturday AM! 1999

Hi guys.

I picked up a 3rd row seat kit from erie vo-vo-- great condition, came in 2 days. I'm at the seatbelt stage of the install-- but I can't seem to loosen the belts from the spool. They came all wound up in a neat package, and try as I may, I cannot pull out any slack.

The mechanism looks simple enough- but gentle or rough I can't get any slack. At first I thought they were position-sensitive, so I mounted them (can't go wrong with the pin setup) but no use-- no slack.

I'm wondering if anyone out there has been in this position, or has any advice!

Thanks very much!








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    3rd row seats-- seatbelts HELP! Mid-Project Saturday AM! 1999

    While changing seats last week in a 740 I went through a similar situation with a seat belt,it tried my patience for about 30 min. I think,but cannot say for sure that they are in fact position sensitive,I only found one position that I could move the task forward at all and that was with several steps backward along the way,the more slack that you expose the easier it becomes.I did not search for seat belt release tips.My best tip is patience,hopefully someone else will have a better solution.Oh... look here

    http://www.brickboard.com/FAQ/700-900/ElectricalSRS.htm#SeatBeltRetractionReset







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.