Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2019 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

1983 Hubcaps question 200

Does anyone know if these caps will fit my stock 1983 DL.

http://i.ebayimg.com/11/!BjrDBl!Bmk~$(KGrHqUH-D0Es-YhG0HyBLUkWNWFQ!~~_12.JPG

My stock caps are not quite like these... mine have a separate center piece that clips onto the spindle part of the hub.. the have a "V" on the center piece.

Also, Does anyone have a stock 1983 set for sale?









  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    1983 Hubcaps question 200

    I had these on my '79 242. They required 5 metal clips per wheel to install. The clips slip into small holes between the lugs and are were hidden from sight by the wheel cover.

    Your present wheels will not have the holes for the clips.
    --
    '80 DL 2 door, '89 DL Wagon








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    1983 Hubcaps question 200

    These were stock on a 75 242 that I once had.It will all depend on the rim you have.Although all 14 in. steelies fit the 240s not all the steelies had the same profile in the center hub section.On my 75 these caps snapped right in,held on tight,no extra parts were used.On some steelies I know these will not fit.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    1983 Hubcaps question 200

    Transit wind is correct that they wont fit right.

    I do have a complete set of wheel covers minus the outer trim rings. The center caps are in very good condition. If you're interested in them let me know and I will dig them out and send you pics of them.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      1983 Hubcaps question 200

      Yes I am definately interested if the price is low (Im on a tight budget right now). I think I can afford around $25 + shipping (I think they can go in one of the USPS flat rate boxes). Im not too concerned about the condition as long as they will fit and cover up the hub/lug nuts. I clean/polish up just about anything and make it look descent. If your interesed send me a picture and Ill paypal you the money (or other payment methods that you may prefer).
      Thanks








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    1983 Hubcaps question 200

    If the center won't pop out on these then I don't think they will work. I bought one solid one by mistake and it didn't work. I'm thinking they are for the 122's or something.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.