My 940 turbo needs it's exhaust replaced. The 940 is almost stock with the only modifications being a custom cold air kit, K&N air filter & a boost control valve set to 12-13lbs of boost. We had put a stock turbo system on from FCP, but after a couple years of use it's in need of replacement.

Not wanting to put the same stock system on the car, what do you think is the best replacement system?

I measure 2.125" fromt he downpipe, but a 2.125" fits loosely. What is the size of the stock system?

Thank you in advance for sharing your experiences.

Hello
i put a 3" from the turbo back with one dynaflo muffler and 3" cat.
one of the biggest improvements i have done. very smooth feel when driving.
bought mine from a guy on turbobricks sometimes makes them up and sells them.
search thelostartof.
bolt on w/stainless clamps.
good luck
Mike

this sort of setup will give you the maximum RESTRICTION FREE flow which your turbo will thank you for.

Mandrel bent free flow 3" exhaust from downpipe to tailpipe end

http://www.pbase.com/stealthfti/image/27894468

http://www.pbase.com/stealthfti/image/27894160

http://www.pbase.com/stealthfti/image/27894085

http://www.pbase.com/stealthfti/image/27894042
(read comments on this page)

http://www.pbase.com/stealthfti/image/27893819

http://www.pbase.com/stealthfti/image/27893659