Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2024

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

m-47 gasket set install

posted by  hardknocks! on  Tue Jan 5 13:55 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 12 06:42 CST 2014
[RELATED]

Hello
so i have to put new paper gaskets on the m-47 as the fifth gear housing has a small leak.
bought the re-seal kit from volvo.
do the paper type gaskets go on dry? maybe a little grease?
hope to do this weekend.
thaks
Mike

94 945T
95 944T








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

m-47 gasket set install

posted by  TONY H on  Wed Jan 6 01:39 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 16:39 CST 2014
[RELATED]

Not sure what the "book" says but I always use a schmere of Silicone type Gasket-Maker on all my gaskets. I feel it will help fill any tiny imperfections. That's what I did on my M47 Cover and Rear Gasket








  REPLY TO THIS MESSAGE    PRINT   SAVE 

m-47 gasket set install

posted by  hardknocks! on  Wed Jan 6 08:45 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 12 06:42 CST 2014
[RELATED]

Hello Tony
book says grease, just looked.
also found another error in bentleys when pulling 5th gear case on M-47 11
thanks







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.