Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2011 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Do I need a hydraulic press? 700

posted by  N7SC on  Sun Aug 23 10:49 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 7 14:12 CST 2013
[RELATED]

There is no problem with the car at this time that prompts me to ask. I just happen to have a 30 ton hydraulic press in my garage, and if I can get rid of it, I'd love to. I'm into reducing the clutter and junk right now. With a 1991 745 Turbo with 330,000 miles, is it a good idea to keep the press, or can I get rid of it without fear of needing it for some repair in the future?
--
Scott Cook - 1991 745T, 1985 RX-7 GSL-SE, 1986 Toyota Tercel (Don't laugh, it is reliable, faithful AND gets 41 mpg!)








  •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

    posted by  someone claiming to be on  Wed Dec 31 18:00 CST 1969 [RELATED]

    No need. If you need to press any bushings, a local auto machine shop will do it for about ten bucks each.
    --
    See the 700/900 FAQ at the drop-down menu above right.



    Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.




<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.