Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2006 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

940 A/C COmpressor In A 700? 700

I have a 1993 940 A/C Compressor in my posession that i am considering putting on my 1990 745 When i put the rebuilt engine in, ive already put the conversion kit into the car and am running 134A but im figuering that a compressor built for 134A would provider better cooling. has anyone put a 900 Series compressor into there volvo?
It has the same bolt in design as the original, the only diff i can see so far is there is no place to actually pour oil into the compressor and the connection hoses are not facing upwards but at slight angels, nothing that could not be overcome.
Any ideas or input is deff welcome








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    940 A/C COmpressor In A 700? 700

    From what I'm understanding. The compressors aren't different when it comes to working with the gas. It's the evaporator, accumulator, and orifice tube, and condensor that have to be messed with on an retro. I have seen the inside of them. There isn't much to change out. Except maybe the lubrication. If the old compressor is working. I would just keep using it. Good luck








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      940 A/C COmpressor In A 700? 700

      Ill probly do that for now then, ill rebuild this 93 compressor at a later date. Thanks for the info, if there gonna cool the same there isnt any point in revuilding it at this time.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.